PUF & PIR Panel Manufacturer in Nagpur – Sandwich, Roofing & Wall Panels

Cost comes down to thickness (30mm, 40mm, 50mm are the common options), skin material, coating, and how much you order. As a rough guide, insulated wall panels run ₹80–180 per sq.ft and insulated roofing panels ₹100–220 per sq.ft, factory-direct. Send us the building dimensions and target internal temperature and we will price the actual job rather than quote a range.

Yes. MIDC Butibori & MIHAN SEZ is one of the areas we deliver to regularly, and repeat work there means our team already knows the site access and unloading constraints. Standard despatch is 7–15 working days from order confirmation; we hold stock of common specifications to shorten that where a project is running tight.

Logistics warehouses around MIHAN and Butibori face 48°C summers — insulated PUF roofing cuts heat gain and reduces cooling demand for temperature-sensitive goods. Sandwich PUF Panel addresses that directly, since the insulation sits inside the panel rather than being added as a separate layer that can sag or gap over time.

PUF is the cost-effective choice for most buildings: 0.024 W/mK thermal conductivity, rated B3 under DIN 4102 (Class E under EN 13501-1) and self-extinguishing. PIR costs more but performs better on both counts, at 0.022 W/mK and B-s1,d0, meaning very low smoke and no flaming droplets. Choose PIR where fire compliance drives the specification, which in Nagpur usually means logistics, textiles, food processing work. Where the material must not burn at all, Rockwool is Class A1 non-combustible. We make all three.

Work back from the internal temperature you need to hold. Partitions and general walling are fine at 30–50mm. Temperature-controlled rooms usually need 50–80mm. Cold storage between 0°C and −25°C calls for 80–120mm, and deep freeze for 120–150mm. Our engineers will run the calculation against local ambient conditions at no cost if you send the brief.

Both. Our crews handle erection, sealing, flashing, and finishing to IS 14925:2015. If you already have a contractor, we can supply only, or send a supervisor to train your team on the first bay and leave them to it. Which route makes sense usually depends on how much panel work your contractor has done before.

Mostly Logistics, Textiles, Food Processing, Engineering. The building types repeat even when the industry does not: cold stores, cleanrooms, process halls, warehouses, and factory sheds all need a skin that insulates and cleans down easily.

Yes, including Wardha, Chandrapur, Amravati, Gondia, Bhandara. Being within a single despatch radius matters more than it sounds: panels are long, light, and easy to damage, so fewer transfers between vehicles means fewer dented edges arriving on site.

It is better not to. Roofing panels are made with a trapezoidal profile so water drains and the sheet spans between purlins; wall panels are flat or micro-ribbed because appearance matters more than drainage. Using a wall panel on a roof is where most leak complaints start.

We do complete cold storage, from design through panel supply, installation, and commissioning, holding anywhere from +15°C down to −40°C. Typical work in Maharashtra covers agriculture, dairy, pharma cold chain, frozen food, and logistics. If you only need the envelope and have your own refrigeration contractor, that works too.